LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 919125 Teaching Additional/Telephone Handset (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Teaching Additional/Telephone Handset

Teaching Additional/Telephone Handset

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Voltage drop
  • Risk of damage to control unit
  • Fault entries in the control unit
  • Coding in the control unit is aborted
  • Malfunctions in control unit, even during programming

→ Ensure that the power supply is not interrupted during programming.

→ Connect a battery charger with a current rating of at least → Nominal value: 40 A  to the vehicle battery.

Information 

Later versions of the software may display slightly different text or require a slightly different procedure. The instructions you receive from the Tester itself take precedence over this description.

  1. PIWIS Tester II 9818  must be connected to the vehicle and ignition switched on.
  2. Select the vehicle type and start the PIDT.
  3. Select the menu PCM/CDR  , Drive links  .
  4. Engage telephone handset in the charging cradle.
  5. Confirm the Teach handset  function by pressing [F12].
  6. Start the activation process by pressing [F8].
  7. Follow the instructions on the Tester. The message Handset has been taught  must appear. Press [F11] to go back.
  8. Exit the menu Teach handset  and PCM  .
  9. Check the function of the handset.
scientia non olet · About LEMON Manuals