LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 919019 Removing And Installing Control Unit For Telephone (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Control Unit For Telephone

Removing Control Unit For Telephone

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The telephone control unit is installed in the PCM.

  1. Carefully open the cover on the PCM using a screwdriver.
    Fig 1: Removing PCM Cover
    G09830644Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the two fastening screws -1-  for the control unit and remove the control unit.
    Fig 2: Removing Control Unit Fastening Screws
    G09830645Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals