LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 918419 Removing And Installing Antenna Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Antenna Amplifier

Removing Antenna Amplifier

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The antenna amplifier is installed together with the PCM.

The antenna amplifier is located on the A-pillars.

Remove the ignition key and switch off the audio system.

  1. Unplug the antenna plug for the windscreen -1, 2-  .
  2. Unplug the plug connections for the antenna control unit -3, 4-  on the left-hand side and -3, 4, 5-  on the right-hand side.
  3. Unscrew both fastening screws -6-  .
    4. Fig 1: Removing Antenna Amplifier Plug Connector And Fastening Screws
    G09830616Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals