LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 916219 Removing And Installing Control Unit For Steering Wheel Electronics (Except 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install steering column switch. → INSTALLING STEERING-COLUMN SWITCH 
  2. Install steering column trim. → 481319 REMOVING AND INSTALLING TRIM
  3. Install steering wheel. → INSTALLATION
  4. Install driver's airbag unit. → INSTALLING DRIVER'S AIRBAG UNIT
  5. Read data into the control unit for steering wheel electronics.
  6. Calibrating steering angle sensor
scientia non olet · About LEMON Manuals