LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 916119 Removing And Installing Multi-Function Remote Control (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2) >> Removing Multi-Function Remote Control

Removing Multi-Function Remote Control

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Steering Wheel Installation Position
G09830578Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew the fastening screws -2-  and washers -3-  for the remote control and carefully lever the remote control out using a screwdriver.
    Fig 2: Removing Remote Control Fastening Screws And Washers
    G09830579Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release the electric plug connection on the remote control -A-  and disconnect it.
    Fig 3: Removing Remote Control Electric Plug Connection
    G09830580Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove remote control.