LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 916119 Removing And Installing Multi-Function Remote Control (911 CARR. Coupe, 911 CARR. S Coupe, 911 CARR. CABRIO, 911 CARR. S CABRIO, 911 CARR. 4 Coupe, 911 Turbo Coupe, 911 CARR. 4S Coupe, 911 TARGA 4, 911 TARGA 4S, 911 CARR. 4 CABRIO, 911 CARR. 4S CABRIO, 911 Turbo CABRIO, 911 Gt3, 911 Gt2) >> Installing Multi-Function Remote Control

Installing Multi-Function Remote Control

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert electric connector into the remote control until it clicks into place.
    Fig 1: Installing Remote Control Electric Plug Connection
    G09830581Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert remote control into the steering wheel, position washers -3-  and screw down with the fastening screw -2-  .
    Fig 2: Installing Remote Control Fastening Screws And Washers
    G09830582Courtesy of PORSCHE CARS NORTH AMERICA, INC.