LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 914419 Removing And Installing Loudspeaker Amplifier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Loudspeaker Amplifier

Installing Loudspeaker Amplifier

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Push in electric plug connections for the loudspeaker amplifier until the connectors engage securely.

  1. Connect central electric connector -4-  to the loudspeaker amplifier and lock it.
  2. Slide on retaining clip on loudspeaker amplifier -3-  .
    3. Fig 1: Installing Electric Plug Connector
    G09830560Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Position loudspeaker amplifier at the underbody mounting point.
  4. Secure the loudspeaker amplifier with the fastening screws -1-  and fastening nut -2-  .
    5. Fig 2: Identifying Fastening Screws And Nuts
    G09830561Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals