LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (91 - Radio, Telephone, On-Board Computer, Navigation -- CARRERA (997)) >> WM 911019 Removing And Installing Pcm Display And Operator Control Unit (Except 911 Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. The data/'values' that were read out from the PCM unit must be written back into PCM using the PIWIS Tester 9718  .
  2. If the data/values could not be read out, PCM must be coded.
  3. Install the two side covers on the center console. → INSTALLING CENTRE CONSOLE COVER
scientia non olet · About LEMON Manuals