LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (66 - Exterior Equipment -- CARRERA (997)) >> WM 668319 Removing And Installing Number Plate Cover (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Front Number Plate Cover >> Installing Front Number Plate Cover (ECE)

Installing Front Number Plate Cover (ECE)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The centering rib on the front apron is used for positioning the number plate cover.

  1. Position front number plate cover -2-  on the front apron and align it.
  2. Screw in self-tapping fastening screws -1-  .
    3. Fig 1: Installing Front Number Plate Cover (ECE)
    G09827055Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals