General Affixing Regulations For The Stone Guard Film
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
Affixing area:
- Room temperature: 18 - 30 °C.
- Humidity 40% - 60% relative humidity.
Information
Vehicle for affixing:
- Acclimated to room conditions.
- Wear clean gloves when affixing so that there will not be any visible finger prints on the film.
Information
Application fluid:
- 3 drops of non-lubricating washing-up liquid (e.g. Pril) in 1, 000 ml of distilled water.
- Or mix 25 - 30% isopropanol with distilled water.