Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Banjo bolt to pump unit | Tightening torque | 15 Nm (11 ftlb.) | |||
| Gap dimension X | Length | 15 mm | +5 mm | ||
| Banjo bolt to hydraulic cylinder | Tightening torque | 15 Nm (11 ftlb.) | |||
| Banjo bolt to hydraulic cylinder | Tightening torque | 15 Nm (11 ftlb.) | |||
| Fastening screws securing micro switch holder to hydraulic cylinder | Tightening torque | 0.5 Nm (0.5 ftlb.) |