LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (66 - Exterior Equipment -- CARRERA (997)) >> WM 667237 Disassembling And Assembling Spoiler Drive (Pump Unit) (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO) >> Assembling Spoiler Drive (Pump Unit) >> Filling The Hydraulic Cylinder

Filling The Hydraulic Cylinder

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pump unit
  2. Wire harness
  3. Hydraulic cylinder, left
  4. Hydraulic line, short
  5. Hydraulic cylinder, right
  6. Hydraulic line, long
    7. Fig 1: Overview Of Spoiler Drive (Pump Unit)
    G09827017Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Hold the two hydraulic cylinders -1-  vertically and use a syringe  to fill each hydraulic cylinder with 5 ml of Pentosin  .
    Fig 2: Holding Hydraulic Cylinder
    G09827018Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals