LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (66 - Exterior Equipment -- CARRERA (997)) >> WM 667219 Removing And Installing Spoiler Drive (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO) >> Installing Spoiler Drive >> Installing Air Guide

Installing Air Guide

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the remains of the old double-sided adhesive tape strips -a-  and stick on strips of new double-sided adhesive tape.
  2. Insert the air guides -Arrow A-  and fold them up -Arrow B-  .
  3. Insert the clips -2-  and then press in the screw-in pins -1-  (-Arrow C-  ).
    4. Fig 1: Installing Air Guides
    G09826987Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals