Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Trim frame for rear of rear window to rear center panel | Gap dimension X | 6 mm | +/-1 mm | ||
| Fastening screw securing trim frame for rear window | Tightening torque | 4 Nm (3.0 ftlb.) | |||
| Trim frame for side of rear window to roof pillar | Gap dimension X | 3 mm | +/-1 mm | ||
| Fastening screw for trim frame for rear window | Tightening torque | 1.8 Nm (1.5 ftlb.) | |||
| Fastening nut securing sheetmetal bracket to hinge | Tightening torque | 4 Nm (3 ftlb.) |