Installing Rear Spoiler

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Position the retainer plate -2- at the left and right on the rear lid -3- (-arrow- ) and secure with the fastening screws -1- .
→ Tightening torque: 9.7 Nm (7.5 ftlb.)

Fig 1: Installing Retainer Plate
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position the rear spoiler -2- on the rear lid -3- (-arrows- ) and secure with the fastening screws -1- . → Tightening torque: 9.7 Nm (7.5 ftlb.)

Fig 2: Installing Rear Spoiler
Courtesy of PORSCHE CARS NORTH AMERICA, INC.