Removing Air Inlet Grille

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Inlet Grille Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclip air inlet grille -1- at the top, bottom and front by inserting a plastic wedge at the clips -Arrows A- .

Fig 2: Unclipping Air Inlet Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull the air inlet grille -1- forward out of the two retaining clips -2- in the rear upper area -Arrow A- and remove it.

Fig 3: Removing Air Inlet Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 1: Identifying Air Inlet Grille Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclip air inlet grille -1- at the top, bottom and front by inserting a plastic wedge at the clips -Arrows A- .

Fig 2: Unclipping Air Inlet Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull the air inlet grille -1- forward out of the two retaining clips -2- in the rear upper area -Arrow A- and remove it.

Fig 3: Removing Air Inlet Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.