Installing Roof Joint Cover Strip (C-Pillar Cover
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
Clamping bushes -2- must always be replaced whenever the roof joint cover strip -1- is removed.
- Position roof joint cover strip (C-pillar cover) -1- on the new clamping bushes -2- and press roof joint cover strip (C-pillar cover) -1- in -Arrow- .