Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing door entry guard to body | Tightening torque | 2 Nm (1.5 ftlb.) | +/-20 % | ||
| Fastening screw securing door entry guard to body | Tightening torque | 2 Nm (1.5 ftlb.) | +/-20 % | ||
| Fastening screw securing rear wheel housing liner to door entry guard | Tightening torque | 2 Nm (1.5 ftlb.) | +/-20 % | ||
| Sill cover to door sill | Gap dimension A | 1.3 mm | +0.5 mm | ||
| Sill cover to door sill | Door sill only lowered | Gap dimension B | 2 mm | -1 mm | |
| Sill cover to door sill rear in wheel housing | Gap dimension A | 1.3 mm | +0.5 mm | ||
| Sill cover to door sill at front in wheel housing | Gap dimension A | 1.1 mm |