Installing Rear Wheel Housing Liner: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Rear Wheel Housing Liner

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Press speed nuts -3- onto the front section of the wheel housing liner -A- .

Fig 2: Installing Rear Wheel Housing Liner - Front Section
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert front section of wheel housing liner -A- and secure with fastening screws -1- and fastening nuts -2- . → Tightening torque: 2 Nm (1.5 ft. lb.) → Tightening torque: 2.5 Nm (2.0 ft. lb.)