LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (53 - Body Rear - CARRERA (997)) >> WM 536855 Replacing Rear Wheel Housing (All Models) >> Preparing Connection Areas Of The Body For Installing The Rear Wheel Housing >> Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing

Preparing Connection Areas Of The Body For Installing The Inner Rear Wheel Housing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean undersealing, adhesive residue and paint off the body connecting flanges in the marked areas -A, B, C, D, E, F, G-  using a hot-air gun or rotary brush. Grind the connecting flanges until bare.
    Fig 1: Cleaning Welding Areas
    G09823598Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Coating spot-weld flange areas with zinc powder paint
    1. 2.1. Coat spot-weld flange areas with zinc powder paint.
scientia non olet · About LEMON Manuals