LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (53 - Body Rear - CARRERA (997)) >> WM 536155 Replacing Inner Side Section (Except CABRIO Models) >> Preparing Connection Areas Of The Body For Installing The Inner Side Sections >> Safety Instructions For Flying Sparks During Grinding And Welding Work

Safety Instructions For Flying Sparks During Grinding And Welding Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Danger of explosion and fire from flying sparks during grinding and welding work!
  • Danger of injury and danger of damage to vehicle parts and other vehicles due to flying sparks

→ Cover vehicle parts such as battery, fuel system, paintwork, glass and passenger compartment parts with fire-proof covers and, if necessary, remove batteries and fuel-carrying components.

→ No other vehicles may be left unprotected in areas used for body repair!

scientia non olet · About LEMON Manuals