Danger Of Injury When Welding
- Danger of explosion and fire when welding in the area of highly inflammable materials.
- Irritation to respiratory tracts from toxic zinc oxide emitted when welding galvanized steel!
- Danger of injury from unintentional triggering of pyrotechnical safety components!
- Danger of injury from weld spatters and UV light when welding!
→ Do not perform welding work in a damp environment or on wet ground; there is a risk of fatal injury from the voltage being conducted through the human body. Persons with heart pacemakers should not perform welding work. Use insulating underlays.
→ Remove highly flammable materials from the work area; if necessary, remove units with fuel-carrying parts and protect work areas in the vehicle that are at risk of catching fire using fire-proof covers.
→ Ventilate the work area well.
→ Remove smoke gases with a suitable extraction system .
→ Wear suitable protective gear, such as protective clothing, gloves, a welding shield and, if necessary, a protective mask.
→ For welding work, always disconnect both terminals on the battery. In the case of welding work in the immediate vicinity of the control units for pyrotechnical safety systems, remove the control units before beginning work.
→ In addition, the guidelines of the welding equipment manufacturer and the legal accident prevention regulations and those of the mutual indemnity association (BGV D1) must be observed.