LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (53 - Body Rear - CARRERA (997)) >> WM 535541 Repairing Side Panel (Lock Peg) (All Models) >> Subsequent Work >> Subsequent Work For Body Repairs

Subsequent Work For Body Repairs

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Grind down welded joints and sheetmetal flanges and clean with a wire brush.
  2. Prime flange areas with 2K primer.
  3. Paint repair area and adjacent surfaces, if necessary.
  4. Apply cavity preservation.
  5. Install removed add-on parts in the repair area.
scientia non olet · About LEMON Manuals