LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (53 - Body Rear - CARRERA (997)) >> WM 535019 Removing And Installing Side Section Support (All Models) >> Installing Side Section Support

Installing Side Section Support

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position side section support -2-  on the body and secure with the fastening screw -1-  . → Tightening torque: 13 Nm (9.5 ft. lb.) 
    Fig 1: Identifying Side Section Support On Body
    G09823373Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals