Subsequent Work - Carrera 4
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install fuel level sensor.
→ 201519 REMOVING AND INSTALLING FUEL LEVEL SENSOR - section on "Installing"
- Install cover for tank flange. Fit and tighten four M6 cap nuts and washers.
→ Tightening torque: 10 Nm (7.5 ftlb.) .
- Install luggage compartment cover.
→ 700519 REMOVING AND INSTALLING FRONT LUGGAGE COMPARTMENT TRIM PANEL - section on "Installing"
- Connect ground lead to battery.
- Fill fuel that was removed back into the fuel tank.
→ 2010EN DRAINING AND FILLING THE FUEL TANK - section on "Filling"
- Carry out a function test and check the system for leaks.
- Remove protective covers.