Subsequent Work - Carrera 2
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install fuel level sensor.
→ 201519 REMOVING AND INSTALLING FUEL LEVEL SENSOR - section on "Installing"
- Install carrier plate for battery. Tighten four M8 hexagon collar nuts.
→ Tightening torque: 23 Nm (17 ftlb.) .
- Install the battery.
→ 270619 REMOVING AND INSTALLING BATTERY - section on "Installing".
- Fill fuel that was removed back into the fuel tank.
→ 2010EN DRAINING AND FILLING THE FUEL TANK - section on "Filling".
- Carry out a function test and check the system for leaks.
- Remove protective covers.