LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (20 - Fuel Supply, Control -- CARRERA (997)) >> WM 201519 Removing And Installing Fuel Level Sensor (Except Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Subsequent Work >> Subsequent Work - Carrera 2

Subsequent Work - Carrera 2

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install carrier plate for battery.

    Tighten four M8 hexagon nuts.

    → Tightening torque: 23 Nm (17 ftlb.)  .

  2. Install the battery.

    → 270619 REMOVING AND INSTALLING BATTERY - section on "Installing".

scientia non olet · About LEMON Manuals