Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Carrera 2:

Install carrier plate for battery. Tighten four hexagon nuts. → Tightening torque: 23 Nm (17 ftlb.) .
Install battery. → 270619 REMOVING AND INSTALLING BATTERY - section on "Installing".

Carrera 4:

Install cover for tank flange. Position and tighten four cap nuts and washers. → Tightening torque: 10 Nm (7.5 ftlb.) .
Install luggage compartment cover. → 700519 REMOVING AND INSTALLING TRIM PANEL FOR FRONT LUGGAGE COMPARTMENT - section on "Installing".
Connect ground lead to battery.