Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Transverse restraining strap for fuel tank | Check installation position! | Tightening torque | 23 Nm (17 ftlb.) | ||
| Transverse restraining strap for fuel tank | Check installation position! | Tightening torque | 23 Nm (17 ftlb.) | ||
| Universal joint (steering shaft) to steering gear | Hexagon-head bolt, M8 x 35 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Longitudinal restraining straps for fuel tank cover | Observe installation position (marking L = left and R = right) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Diagonal braces to front-axle cross member | Hexagon nuts, M12 x 1.5 | Tightening torque | 100 Nm (74 ftlb.) | ||
| Holder securing final drive to body | External Torx screws, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Carrier plate for battery to body | Collar nut, M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Holder securing final drive to body | External Torx screws, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Drive shaft to front-wheel drive halfshaft flange | M8 | Tightening torque | 39 Nm (29 ftlb.) | ||
| Universal joint (steering shaft) to steering gear | Hexagon-head bolt, M8 x 35 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Longitudinal restraining straps for fuel tank cover | Observe installation position (marking L = left and R = right) | Tightening torque | 23 Nm (17 ftlb.) | ||
| Diagonal braces to front-axle cross member | Hexagon nuts, M12 x 1.5 | Tightening torque | 100 Nm (74 ftlb.) |