LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (20 - Fuel Supply, Control -- CARRERA (997)) >> WM 200719 Removing And Installing Filler Neck (Turbo Coupe, Turbo S Coupe, Turbo CABRIO & Turbo S CABRIO) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Filler neck holder to body Internal Torx screw, M6 x 20 Tightening torque 10 Nm (7.5 ftlb.)    
Holder securing filler neck Hexagon-head bolts, M6 x 20 Tightening torque 10 Nm (7.5 ftlb.)    
scientia non olet · About LEMON Manuals