LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 637319 Removing And Installing Rear Bracket (Impact Pipe, Impact Absorber) (All Models) >> Technical values

Technical values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening screws of impact pipe am rear of M8 x 30 Fasten final tightening 17 ftlb.    
Fastening screws of impact absorber am rear of M8 x 30 Fasten final tightening 23 Nm (ftlb.) (17)    
scientia non olet · About LEMON Manuals