LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 637319 Removing And Installing Rear Bracket (Impact Pipe, Impact Absorber) (All Models) >> Removing rear bracket (impact pipe, impact absorber) >> Removing rear impact pipe

Removing rear impact pipe

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Rear Impact Pipe
G09824806Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Undo fastening screws -1-  .
    Fig 2: Removing Impact Pipe
    G09824807Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove the impact pipe -2-  with seal -3-  .
scientia non olet · About LEMON Manuals