LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 636519 Removing And Installing Rear Bumper OVERRIDER(Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Removing rear bumper overrider >> Removing rear bumper horn

Removing rear bumper horn

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Bumper Horn
G09824800Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Push retaining pins from the inside and unclip expanding clips.
    Fig 2: Removing Expanding Clips
    G09824801Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert a spatula laterally between the rear apron -1-  and bumper horn -2- -arrow A-  . Press in the locking tab -arrow B-  and remove the bumper horn -2-  .
    Fig 3: Removing Bumper Horn
    G09824802Courtesy of PORSCHE CARS NORTH AMERICA, INC.