LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635719 Removing And Installing Rear Retaining Strip (All Models) >> Technical values

Technical values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Upper edge of rear retaining strip to upper edge of rear bumper Gap dimension - X Adjustment value 168 mm    
Upper edge of rear bumper to lower edge of rear lid Gap dimension - Y Adjustment value 166 mm    
scientia non olet · About LEMON Manuals