LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635537 Disassembling And Assembling Rear Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Disassembling rear apron >> Removing lower part of rear apron

Removing lower part of rear apron

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew fastening screw -3-  at the left and right between the lower part of the rear apron -1-  and the rear apron -2-  .
    Fig 1: Removing Lower Part Of Rear Apron
    G09824790Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Insert a screwdriver between the lower part of the rear apron -1-  and the rear apron -2-  while at the same time releasing the locking lugs -arrow A-  , and remove lower part of rear apron from the rear apron -arrow B-  .
scientia non olet · About LEMON Manuals