Removing air outlet grille

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

When removing the air outlet grille, do not remove the retaining clips by inserting the screwdriver between the retaining clip and the rear end ribs!
Use new retaining clips for installation!

Move the retaining clips -2- as far as possible to one side -arrow A- and prise them open with a screwdriver -arrow B- . Remove retaining clips -2- .

Fig 1: Removing Air Outlet Grille
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Insert a screwdriver between the air outlet grille -1- and rear apron -3- and release the locking lugs.
Remove air outlet grille -1- from the rear apron -3- (-arrow C- ).