Technical values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing holder for rear apron to body | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Fastening screw securing rear apron to body | Tightening torque | 2.8 Nm (2.0 ftlb.) | |||
| Fastening screw securing rear apron to body | Tightening torque | 2.8 Nm (2.0 ftlb.) | |||
| W= distance to bottom of rear apron | Gap dimension | 19.3 mm | |||
| X = distance to top of rear apron | Gap dimension X | 21.2 mm | |||
| Z = work out distance at sides to the left and right uniformly | Gap dimension Y | 24.3 mm | |||
| Y = projection with respect to top of rear apron | Gap dimension Y | 11.7 mm | |||
| V = projection with respect to bottom of rear apron | Gap dimension Y | 13.5 mm |