Technical values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing heat shield at the sides to body | Tightening torque | 3.5 Nm (2.5 ftlb.) | |||
| Fastening screw securing bumper reinforcement to impact pipe | Tightening torque | 85 Nm (63 ftlb.) | |||
| Upper edge of rear bumper to lower edge of rear lid | Gap dimension -Y- | Adjustment value | 166 mm | ||
| Upper edge of rear bumper to upper edge of rear retaining strip | Gap dimension -X- | Adjustment value | 168 mm | ||
| Heat shield for exhaust system and lower retaining strip | Gap dimension -W- | Adjustment value | 94 mm | ||
| Heat shield to lower retaining strip | Projection dimension -Z- | Adjustment value | 2 mm |