LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 635019 Removing And Installing Rear Bumper (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Removing rear bumper >> Notes

Removing rear bumper: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Rear Bumper
G09824764Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew tapping screws -3-  and fastening screws -1-  and remove rear bumper -2-  or (USA/Canada version) -2A-  with lower centre heat shield fitted -4-  .
    Fig 2: Removing Rear Bumper
    G09824765Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -5-  and take off lower centre heat shield -4-  and rear support -7-  . Disassemble rear support -7-  if necessary by unscrewing the fastening screws -6-  . Remove connecting angle -8-  and speed nuts -9-  .
scientia non olet · About LEMON Manuals