LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 633319 Removing And Installing Front Bracket (Impact Pipe) (All Models) >> Installing front bracket (impact pipe) >> Install front impact pipe

Install front impact pipe

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Front Impact Pipe
G09824762Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position the seal impact pipe -3-  and impact pipe -2-  .
    Fig 2: Identifying Front Impact Pipes
    G09824763Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw in fastening screws M8 x 30 -1-  and tighten using tightening torque → Final tightening: 17 ftlb.  .
scientia non olet · About LEMON Manuals