Technical values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Measuring point on front retaining strip | Adjustment dimension | 316 mm | |||
| Lower edge of front lid to upper edge of front retaining strip | Adjustment dimension | 26 mm | +/-1 mm | ||
| Lower edge of front retaining strip to body | Adjustment dimension | 91 mm | +/-0.5 mm | ||
| Outer edge of front retaining strip to front edge of wing | Adjustment dimension | 130 mm | +/-0.5 mm | ||
| Fastening nuts securing front retaining strip to body | Tightening torque | 10 Nm (7.5 ftlb.) |