LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631537 Disassembling And Assembling Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Disassembling front apron >> Removing fixing clip for wire harness

Removing fixing clip for wire harness

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a screwdriver between the front apron -2-  and fixing clip -1-  and remove fixing clip -1-  (-arrow-  ).
    Fig 1: Removing Fixing Clip For Wire Harness
    G09824742Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check fixing clip -1-  and replace it if necessary.
scientia non olet · About LEMON Manuals