LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631537 Disassembling And Assembling Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Assembling front apron >> Installing expander nut for number plate holder

Installing expander nut for number plate holder

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position expander nuts -2-  on the front apron -1-  and press in -arrows-  until they engage securely.
    Fig 1: Locating Expander Nut For Number Plate Holder
    G09824746Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals