LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631519 Removing And Installing Front Apron (Turbo Coupe, Turbo S Coupe, Turbo CABRIO, Turbo S CABRIO) >> Installing front apron >> Securing front apron underneath

Securing front apron underneath

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure front apron -2-  underneath using the fastening screws -1-  . → Tightening torque: 2.8 Nm (2 ftlb.) 
    Fig 1: Securing Front Apron Underneath
    G09824738Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check gap dimensions at the front lid, wing and main headlights. Loosen fastening screws if necessary and adjust gap dimensions by moving the front apron. → 5 Diagram - body gap dimensions 
scientia non olet · About LEMON Manuals