Securing front apron at the top

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Ensure water and electrical lines are laid properly.

Check retaining strip for front apron and replace it if necessary. → Installing front retaining strip .
Check speed nuts -3- and replace them if necessary.
Position the front apron -2- on the body at the front.

Fig 1: Securing Front Apron At Top
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure front apron -2- at the top using the fastening screws -1- . → : 2.8 Nm (2 ftlb.)
Insert locking mechanisms -1- at the guides -2- of the front apron and lock in -direction of arrow- using a plastic wedge.

Fig 2: Securing Front Apron At Top
Courtesy of PORSCHE CARS NORTH AMERICA, INC.