LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (63 - Bumpers -- CARRERA (997)) >> WM 631019 Removing And Installing Front Bumper (All Models) >> Removing front bumper >> Removing clamping pieces

Removing clamping pieces

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew fastening screws -2-  and slide the clamping pieces (USA version) -1a-  or (Canada version) -1b-  down sideways off the front bumper -3-  .
    Fig 1: Removing Clamping Pieces
    G09824711Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals