WM 324719 Removing And Installing Torque Converter Sealing Ring (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, CARR. 4 Coupe, Turbo Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO): Information
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Information
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
Information
Before installing the torque converter, check the hub for scoring. If damaged, the converter must be replaced.
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
Information
Before installing the torque converter, check the hub for scoring. If damaged, the converter must be replaced.