Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Camshaft-housing cover | M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Camshaft controller cover | Tightening torque | 10 Nm (7.5 ft. lb.) | |||
| Bar ignition module to camshaft-housing cover | Internal Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Ground strap to camshaft-housing cover | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Union nut securing oil return line to pump and oil tank | M30 x 1.5; counter at the connection piece | Tightening torque | 60 Nm (44 ft. lb.) | ||
| Oil return line to camshaft-housing cover | External Torx screw (E10), M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Heat shield to camshaft-housing cover | External Torx screw (E10), M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Holder for front silencer | M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Cover to camshaft housing | External Torx screw (E10), M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Vacuum pump with camshaft-housing | External Torx screw (E10), M6 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Vacuum line to pump | External Torx screw (E10), M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Vacuum line to engine/transmission flange | External Torx screw (E10, M6 x 12) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Coolant regulator housing cover | Cheese head bolt, M6 x 35 (hexagon socket a/f 5) | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Screw-type clamp on coolant hose | Tightening torque | 3 Nm (2 ft. lb.) | |||
| Bar ignition module to camshaft-housing cover | Internal Torx screw, M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Ground strap to camshaft-housing cover | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Vacuum line to camshaft-housing cover, 4-6 | External Torx screw (E10), M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) |