Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cylinder head cover to cylinder head | Internal Torx countersunk screw, M6 x 25 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Ignition coil to cylinder head cover | M6 x 16 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Heat shield to cylinder head cover | M6 x 12 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Exhaust manifold to cylinder head | M8 x 21 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Holder for rear silencer | M8 x 20 | Tightening torque | 23 Nm (17 ft. lb.) |