Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Mounting saddles and camshaft thrust bearings | External Torx screw (E10), M6 x 30 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Oil guide housing to camshaft | M5 cheese head bolt, hexagon socket a/f 4 | Tightening torque | 7 Nm (5 ft. lb.) | ||
| Chain tensioner cover | External Torx screw (E10), M6 x 20 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Guide rail | External Torx screw, M6 x 25 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Camshaft actuators | Hexagon-head bolt and internal serration screw, M12 x 130 | Initial tightening | 50 Nm (37 ft. lb.) | ||
| Intake camshaft actuator to camshaft | Hexagon-head bolt (a/f 16), M12 x 130 | Torque angle | 110° | +/-5° | |
| Outlet camshaft actuator to camshaft | Internal serration screw, M12 x 130 | Torque angle | 140° | +/-5° | |
| Vacuum pump driver to camshaft controller | Internal Torx screw, M6 x 55 | Initial tightening | 10 Nm (7.5 ft. lb.) | ||
| Vacuum pump driver to camshaft controller | Internal Torx screw, M6 x 55 | Torque angle | 120° |